COMX Club Forum http://www.comxclub.hobby-site.com/forum/ |
|
Emma 02 V1.33 http://www.comxclub.hobby-site.com/forum/viewtopic.php?f=4&t=24 |
Page 1 of 1 |
Author: | etxmato [ Thu Nov 07, 2019 11:19 pm ] |
Post subject: | Emma 02 V1.33 |
Hi, Just released Emma 02 - V1.33, took me exactly 2 months..... Anyway I think this is a nice one . I replaced the CDP18S6xx emulators which I had added in V1.32 with one Microboard System emulator. This one emulates the 11 CPU boards (CDP18S600 to 610) as well as multiple memory boards, display, UART, printer, FDC, tape, I/O and video boards. Option to specify 24 Microboards at the same time, with the current supported boards I don't think you can 'fill it'. There is a limitation as CPU boards have to go in slot 1 and some of the boards can only be used 'once' (display, printer, FDC, tape, I/O and video). I have some pre defined configurations loadable via the File / Configuration / Load menu, including the MCDS, MS2000 as well as a 'demo' configuration using the COMX ROM on the CDP18S661 video boards. Download: Change Log: Available for OS X, windows (32/64 bit), linux (rpm/dev) As always bug reports, questions or comments are welcome. Cheers, Marcel. |
Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |